PVI OnTrac Ramps with Handrails

PVI Mobility Ramps with Handrails

OnTrac Ramp by PVI
PVI Ontrac Ramp
OnTrac Mobility Ramp with Handrails

PVI OnTrac solid wheelchair ramps with handrails are a semi permanent ramp suitable for use outside (or inside) for people who require a semi permanent wheelchair ramp with a handrail. They are made of durable rust free Aluminum.

Features

  • Ramps are available in  4’, 5’, 6’, 7’, 8’ and 10 ft long lengths
  • Manufactured and welded in 2′, 3′ & 4 foot long sections and then spliced to create additional sizes.
  • The Top hand rail is finished flush with the end of the ramp for those mounting it at the entrance of a door. Works well with verandas and other applications as well, see photos. Top Looped handrail end caps are optional.
  • Easy modular installation, the unit arrives flat packed in sections.
  • Durable and weather resistant
  • Features 4″ Curbing (2″ curbing on the XPS436)
  • Slip resistant grooved aluminum surface
  • All aluminum construction
  • Handrail height is 864 mm or 34″
  • Little or no maintenance
  • Manufactured in the USA
 Model NumberLength x
Usable Width
Total WidthAprox WeightWeight capacity*Availability
 XPS436 122 x 91.5 cm 
4′ x 36″
104 cm 27 kg 385 kgSold Out
ETA Mid 2024
 XPS536 152 x 91.5 cm 
5″ x 36″
104 cm 32 kg 385 kgIn Stock
 XPS636 183 x 91.5 cm 
6″ x 36″
104 cm 40 kg 385 kgIn Stock
 XPS736 213 x 91.5 cm 
7′ x 36″
104 cm 45 kg 385 kgSold Out
ETA Mid 2024
 XPS836 244 x 91.5 cm 
8′ x 36″
104 cm 50 kg 385 kgSold Out
ETA mid 2024
 XP1036 305 x 91.5 cm  10’x 36″104 cm 58 kg 385 kgIn Stock
Ontrac Ramp with Handrails by PVI
Ontrac Ramp with Handrails by PVI

 * Maximum ramp capacity 192.5 kg (one axle) 385 kg (two axles)

Manufactured in the United States

Please Note: These ramps are supplied as a wheelchair ramp kit, they are flat packed, and require assembly by a handy person.

FOOTING AND ANCHORING:

The PVI ONTRAC Ramp is designed to be a freestanding, independent structure that does not have to be permanently attached to the building it serves. Each freestanding ramp must be anchored at the upper and lower end. Anchoring may consist of lag screw or bolts into existing concrete, precast pads, patio pavers or concrete poured in place.

PVI Ontac Wheelchair Ramp with Handrails
Top Handrail Loop End Caps are optional

Shipping from Sydney Available

Shipping is available Australia wide, please contact with your Town/Suburb and postcode for a delivery quote. Installation can easily be performed by a handy person as its simply bolted together, the ramps are flat packed into sections and include instructions, assembly hardware is provided.

Pick up in Sydney available

Pick up from our Hornsby warehouse is also available. To pick up you will need a van, ute, large SUV or trailer especially if you are purchasing the long sizes.

1:12 gradient quoted in the video applies to the USA, In Australia for over 20 cm in threshold height, the gradient is 1:14

Downloads

We do strongly suggest you take a look at the PDF assembly instructions link below before purchasing this product to assess for suitability for your needs.

If you are interested in the PVI OnTrac Ramps with Handrails and want to know more, please contact us via the button below or call 02 94824893.

Specifications are due to change without notice, please contact us to confirm

BACK TO TOP